Timber cross-sections
- Plane and chamfer timber cross-sections of 15 x 30 to 300 x 400 mm
- Passing cross-sections up to 310 x 450 mm
- Highly efficient machining without retooling or presetting
- Chip removal possible up to 12 mm - bottom 4 mm, top 8 mm, left/right each 12 mm
- Chamfer unit with 12 mm x 45°, option 42 mm x 45
- Planing and chamfering possible for short parts as of 1.2 m
Drive motors
The high-power drive motors are impressive and offer
-
2 horizontal shafts each with 7 kW (option 9.2 kW)
-
2 vertical shafts each with 7 kW (option 9.2 kW)
-
4 chamfer units each with 1.1 kW (option 5.5 kW)
-
7 feed units each with 0.37 kW
Centrifugal clamping system with TriTALL® cutter
Due to the centrifugal clamping system the cutter change with 4 or 2 cutters per planer head is carried out in seconds without tools or setting work.
TriTALL® cutters made of chrome steel, HSS cutters, solid carbide cutters and M42 cutters with hardened cutting edge and soft core are available for every requirement and wood type.
PC-based control
The PC-based control system automatically adjusts the feed speed according to the load on the planer motors, thus avoiding downtime.
Infeed and outfeed roller conveyor
The planing machines are already equipped as standard with an infeed and outfeed roller conveyor as well as a sound insulation cabin.